DESCRIPTION: neo 6m gps price in bd
NEO 6m gps price in bd. The Ublox NEO-6M gps engine on this board is a quite good one, with high precision binary output. It has also high sensitivity for indoor applications. The gps module have a battery for power backup and EEprom for storing configuration settings.
The antenna is connected to module through ufl cable which allow for flexibility in mounting the gps such that the antenna will always see the sky for best performance. This make it powerful to use with cars and other mobile applications.
Ublox NEO 6M GPS Module has serial TTL output, it has four pins:TX, RX, VCC and GND. You can download the u-center software for configuring the gps and changing the settings and much more. It is really good software (see link below).
Ublox NEO 6M GPS Info:
One of the best features the chip provides is Power Save Mode(PSM). It allows a reduction in system power consumption by selectively switching parts of the receiver ON and OFF. This dramatically reduces power consumption of the module to just 11mA making it suitable for power sensitive applications like GPS wristwatch. neo 6m gps price in bd.
The necessary data pins of NEO 6M GPS chip are broken out to a 0.1″ pitch headers. This includes pins required for communication with a microcontroller over UART. The module supports baud rate from 4800bps to 230400bps with default baud of 9600.
SPECIFICATION:(neo 6m gps price in bd)
|Receiver Type||50 channels, GPS L1(1575.42Mhz)|
|Horizontal Position Accuracy||2.5m|
|Navigation Update Rate||1HZ (5Hz maximum)|
|Capture Time||Cool start: 27sHot start: 1s|
|Communication Protocol||NMEA, UBX Binary, RTCM|
|Serial Baud Rate||4800-230400 (default 9600)|
|Operating Temperature||-40°C ~ 85°C|
|Operating Voltage||2.7V ~ 3.6V|
Features:(neo 6m gps price in bd)
- u-blox NEO 6M onboard, with high-gain active antenna
- Chargeable backup battery, keeps the ephemeris data when power down, supports hot starts
- Onboard EEPROM for storing config information
- Compatible with Arduino and Raspberry Pi
- GPS Tracker
- Multicopter Positioning
- GPS doesn’t work indoor. Please use the module outside buildings for it to function preperly.
- You’ll need a USB-Serial converter if you want to configure this module using U-center.