Cart

Your cart is empty

Robo Tech Valley
LIMITEDMAX30102 Pulse Oximeter Heart Rate Sensor Module

MAX30102 Pulse Oximeter Heart Rate Sensor Module

(0 reviews)✓ In Stock
৳340৳340-0%

Product Overview: MAX30102 Pulse Oximeter & Heart Rate Sensor The MAX30102 is an ultra-compact, high-sensitivity biosensor module designed for non-invasive heart rate and blood oxygen (SpO2) monitoring. It is a significant upgrade over the earlier MAX30100, featuring a higher resolution 18-bit ADC and an integrated glass cover that minimizes ambient light interference. This module is widely used in fitness trackers, smartphones, and medical-grade wearables due to its low power consumption and robust "Photoplethysmography" (PPG) technology. Technical Specifications Feature Specification Operating Voltage 3.3V to 5V (on-board regulator included in most modules) LED Supply Voltage 3.3V (Typical) to 5.0V Peak Wavelengths Red: 660nm / Infrared (IR): 880nm ADC Resolution 18-bit (High precision) Communication I2C (Address: 0x57) Max Sampling Rate Up to 3200 samples per second Power Consumption < 1mW in heart-rate monitor mode Shutdown Current 0.7µA (Typical) Operating Temp. -40°C to +85°C Key Features Integrated Optical Solution: Combines red and IR LEDs, photodetectors, and low-noise electronics in a single 5.6mm x 3.3mm package. Ambient Light Rejection: Specialized circuitry filters out background light to ensure accurate readings even in bright environments. 32-Sample FIFO Buffer: An internal memory bank allows the sensor to store data, freeing up your microcontroller (like your ESP32) for other tasks without losing signal data. On-Chip Temperature Sensor: Provides die temperature data (±1°C accuracy) for environmental compensation and calibration. Logic Level Flexibility: Many breakout boards feature a solder jumper to switch between 1.8V and 3.3V logic levels. Pin Description VIN: Main power input (1.8V - 5V). SCL / SDA: I2C clock and data lines. INT: Active-low interrupt pin (notifies the MCU when data is ready in the FIFO). GND: Ground connection. RD / IRD: Red and IR LED cathode terminals (usually left unconnected as they are managed internally).

Quantity:
1
700000 available
Buy Now

Product Overview: MAX30102 Pulse Oximeter & Heart Rate Sensor The MAX30102 is an ultra-compact, high-sensitivity biosensor module designed for non-invasive heart rate and blood oxygen (SpO2) monitoring. It is a significant upgrade over the earlier MAX30100, featuring a higher resolution 18-bit ADC and an integrated glass cover that minimizes ambient light interference. This module is widely used in fitness trackers, smartphones, and medical-grade wearables due to its low power consumption and robust "Photoplethysmography" (PPG) technology. Technical Specifications Feature Specification Operating Voltage 3.3V to 5V (on-board regulator included in most modules) LED Supply Voltage 3.3V (Typical) to 5.0V Peak Wavelengths Red: 660nm / Infrared (IR): 880nm ADC Resolution 18-bit (High precision) Communication I2C (Address: 0x57) Max Sampling Rate Up to 3200 samples per second Power Consumption < 1mW in heart-rate monitor mode Shutdown Current 0.7µA (Typical) Operating Temp. -40°C to +85°C Key Features Integrated Optical Solution: Combines red and IR LEDs, photodetectors, and low-noise electronics in a single 5.6mm x 3.3mm package. Ambient Light Rejection: Specialized circuitry filters out background light to ensure accurate readings even in bright environments. 32-Sample FIFO Buffer: An internal memory bank allows the sensor to store data, freeing up your microcontroller (like your ESP32) for other tasks without losing signal data. On-Chip Temperature Sensor: Provides die temperature data (±1°C accuracy) for environmental compensation and calibration. Logic Level Flexibility: Many breakout boards feature a solder jumper to switch between 1.8V and 3.3V logic levels. Pin Description VIN: Main power input (1.8V - 5V). SCL / SDA: I2C clock and data lines. INT: Active-low interrupt pin (notifies the MCU when data is ready in the FIFO). GND: Ground connection. RD / IRD: Red and IR LED cathode terminals (usually left unconnected as they are managed internally).

Related Products