1). High quality charging Chip TP4056, simple circuit, good protective value, high charging precision.
2). Complete mechanical automation processing, High reliability.
3). Automatically adjust the output current from 100 to 1000ma by simply changing the fixed resistor on the circuit board.
Lithium Battery Charging Board. It can be used to charge for one pcs of lithium battery or serval parallel lithium batteries.
Input Voltage: 4.5~5.5V
Full charging voltage: 4.2V
Max output current:1A
Power Indicator: Red stands for charging, Green stands for fully charged.
Input interface: Micro interface
Item Size: 25mm*19mm.
The output current and the corresponding resistance
1). The Ampere meter can only be connected to 5v input port of the module.
2). It is better that the charging current is 37% of the battery capacity. For example, the charging current should be 400 for the 1000mAH battery.
3). The connection wire should not be too thick.
4). Make sure the connect point is good.
5). If the input voltage is too high, For example 5.2V or even 5.5V, then the charging current will be less than 1000mA, it is normal. When the voltage is too high, the chip will automatically reduce the charging current to protect the chip from burning damage. Besides, it is normal that the chip feel hot when the working temperature of the chip is around 60°.
Package Included :
1 x Lithium Battery Charging Board Power Module TP4056 MICRO USB 1A
100% satisfaction guarantee:
We offer you to 100% satisfaction guarantee on our products. So, If you have any problem with our products then please contact with us and we will be happy to solve the problem for you.
Equally Important that Customer satisfaction is our highest priority.
In addition, our every products that we sell has a strict quality inspection. So that, If you want to buy our products then do not hesitate to add them to the cart and buy it. Correspondingly, We are committee to providing you best products and services.