Cart

Your cart is empty

Robo Tech Valley
LIMITEDHC-12 433Mhz SI4463 Wireless Module 1000m Replace Bluetooth

HC-12 433Mhz SI4463 Wireless Module 1000m Replace Bluetooth

(0 reviews)✓ In Stock
৳589৳589-0%

Product Overview: HC-12 433MHz Wireless Serial Transceiver The HC-12 is a long-range, high-performance wireless serial communication module based on the Si4463 transceiver chip. It is designed to act as a "wireless bridge," allowing two microcontrollers (like your Arduino or ESP32) to communicate over long distances just as they would with a wired serial (TTL) connection. Marketed as a superior alternative to Bluetooth for non-audio tasks, the HC-12 offers a massive 1,000-meter range in open space, making it ideal for remote-controlled cars, long-distance telemetry, and agricultural monitoring. Technical Specifications Feature Specification Microcontroller / Chip STM8S003 (MCU) + Si4463 (RF Chip) Operating Frequency 433.4MHz to 473.0MHz (100 Channels) Supply Voltage 3.2V to 5.5V DC Communication Distance Up to 1,000m (Open space, 5000bps, built-in antenna) Transmitting Power Max 20dBm (100mW) - Adjustable Receiver Sensitivity -117dBm at 5000bps Interface Serial UART (TTL Level) Antenna Port IPX connector or Spring antenna solder hole Key Features Long-Distance Transmission: Achieves up to 1km range, far exceeding the 10-30m limit of standard Bluetooth (HC-05/06) modules. Transparent Transmission: Once configured, it functions like a physical wire. Data sent into the TX pin of one module instantly appears at the RX pin of the other. Wide Frequency Selection: Supports 100 channels with 400kHz spacing, allowing multiple pairs of modules to operate in the same area without interference. Low Power Modes: Features four specialized power modes (FU1, FU2, FU3, FU4) to balance range and power consumption (ranging from 80µA in deep sleep to 100mA during transmission). Flexible Configuration: Use AT Commands to change the baud rate, frequency channel, and transmitting power on the fly. Comparison: HC-12 vs. Bluetooth (HC-05) Feature HC-12 (433MHz) Bluetooth (2.4GHz) Range Up to 1,000m ~10m to 30m Wall Penetration Excellent (lower frequency) Poor (higher frequency) Power Consumption Low (Adjustable) Moderate Protocol Transparent Serial Complex Pairing/Stack Best Use Case Long-range Telemetry Close-range Smartphone Sync

Quantity:
1
700000 available
Buy Now

Product Overview: HC-12 433MHz Wireless Serial Transceiver The HC-12 is a long-range, high-performance wireless serial communication module based on the Si4463 transceiver chip. It is designed to act as a "wireless bridge," allowing two microcontrollers (like your Arduino or ESP32) to communicate over long distances just as they would with a wired serial (TTL) connection. Marketed as a superior alternative to Bluetooth for non-audio tasks, the HC-12 offers a massive 1,000-meter range in open space, making it ideal for remote-controlled cars, long-distance telemetry, and agricultural monitoring. Technical Specifications Feature Specification Microcontroller / Chip STM8S003 (MCU) + Si4463 (RF Chip) Operating Frequency 433.4MHz to 473.0MHz (100 Channels) Supply Voltage 3.2V to 5.5V DC Communication Distance Up to 1,000m (Open space, 5000bps, built-in antenna) Transmitting Power Max 20dBm (100mW) - Adjustable Receiver Sensitivity -117dBm at 5000bps Interface Serial UART (TTL Level) Antenna Port IPX connector or Spring antenna solder hole Key Features Long-Distance Transmission: Achieves up to 1km range, far exceeding the 10-30m limit of standard Bluetooth (HC-05/06) modules. Transparent Transmission: Once configured, it functions like a physical wire. Data sent into the TX pin of one module instantly appears at the RX pin of the other. Wide Frequency Selection: Supports 100 channels with 400kHz spacing, allowing multiple pairs of modules to operate in the same area without interference. Low Power Modes: Features four specialized power modes (FU1, FU2, FU3, FU4) to balance range and power consumption (ranging from 80µA in deep sleep to 100mA during transmission). Flexible Configuration: Use AT Commands to change the baud rate, frequency channel, and transmitting power on the fly. Comparison: HC-12 vs. Bluetooth (HC-05) Feature HC-12 (433MHz) Bluetooth (2.4GHz) Range Up to 1,000m ~10m to 30m Wall Penetration Excellent (lower frequency) Poor (higher frequency) Power Consumption Low (Adjustable) Moderate Protocol Transparent Serial Complex Pairing/Stack Best Use Case Long-range Telemetry Close-range Smartphone Sync

Related Products