Sale!

Flame Sensor Module for Fire Detection

৳ 40.00

Earn 40 ROBO-Points worth ৳ 0.40

Description

Flame Sensor price in bd

Flame Sensor Module is sensitive to the flame, but also can detect ordinary light. Usually used as a flame alarm. Detects a flame or a light source of a wavelength in the range of 760nm-1100 nm. Detection point of about 60 degrees, particularly sensitive to the flame spectrum.

This Flame Sensor Module is used to detect fire/flame source or other light sources of the wave length in the range of 760nm – 1100 nm. It is based on the YG1006 sensor which is a high speed and high sensitive NPN silicon phototransistor. Due to its black epoxy, the sensor is sensitive to infrared radiation. Sensor can be a great addition in a fire fighting robot, it can be used as a robot eyes to find the fire source. When the sensor detects flame the Signal LED will light up and the D0 pin goes LOW.

Feature:(Flame Sensor price in bd)

1.It’s able to detect light or flame source and wavelength should be within 760nm to 1100nm. The flame distance of the lighter is 80 cm. The larger the flame, the farther the test distance is.

2, the detection angle is about 60 degrees in addition the sensitivity is adjustable

4, the comparator output, the signal is clean, the waveform is good, the driving ability is strong, more than 15mA

5, with adjustable precision potentiometer to adjust sensitivity

6, output form is DO digital switch output (0 and 1) and AO is analog voltage output

7, with fixed bolt holes for easy installation therefore it becomes user friendly

8, small board PCB size: 1.26inchx0.56inch/3.2cm x 1.4cm

9. Use a wide voltage LM393 comparator and it’s working voltage 3.3V-5V

Module instructions:(Flame Sensor price in bd)

1. The flame sensor is most sensitive to flame and is also reactive to ordinary light so user should keep it away from ordinary light.
2,  output interface of the the small board can be directly connected to the IO port of the microcontroller.
3.User should keep the sensor and the flame at a certain distance so that it can avoid damage to the sensor at high temperature. The flame distance of the lighter is 80cm. The larger the flame, the farther the test distance is.
4,Most importantly Analog to Digital conversion procedure and analog output mode make the result more precision.

In conclusion it’s a precise flame detector.

Package Include:flame sensor price in bd

1 x Flame Sensor Module for Fire Detection

100% satisfaction guarantee: Flame sensor price in bd

We offer you to 100% satisfaction guarantee on our products. So, If you have any problem with our products then please contact with us and we will be happy to solve the problem for you.

Equally Important that Customer satisfaction is our highest priority.
In addition, our every products that we sell has a strict quality inspection. So that, If you want to buy our products then do not hesitate to add them to the cart and buy it. Correspondingly, We are committee to providing you best products and services.Flame sensor price in bd.


Robo Tech Valley

Robotics Starting Kit with Ninja X2 Chassis

Reviews

There are no reviews yet.

Be the first to review “Flame Sensor Module for Fire Detection”