Robotic Claws

৳ 5,000.00

Earn 5,000 ROBO-Points worth ৳ 50.00


Robotic Claws

Robotic Claws is a automated robot hand, a small and delicate robotic hand, Robotic Claws only uses a servo motor without Arduino, you can use servo tester/controller to control the motion.

You can use those robotic claws  for humanoid boxing robots. There are so many tournaments happen all over the world.

Digital Servo Specification:

– Torque: 15 kg/cm (208 oz/in) 6.6V;17 kg/cm (236 oz/in) 7.4V
– Speed: 0.16sec/60°(7.4V)
– Input voltage: DC 6~8.4V
– Dimension: 40*20*40.5mm(1.57*0.78*1.59inch)

How to use:

1. Connect the power to the tester
2. Plug the servo to the servo interface. + is positive pole , – is negative pole, S is signal port;
3. The servo will rotate synchronously when you turn the knob
4. You can press the button below the knob to switch the mode between Manual(control the servo rotation) and Neutral Position(return to neutral position and can not control servo rotation)

How to wire:

1)Connect the charging port of the lithium battery to the white terminal directly
2)Or connect the power supply to the blue terminal, positive voltage 5~8.4v available.


  • assembled left hand
  • Vehicles & Remote Control Toys
  • Four-wheel drive attributes: Assemblage
  • For vehicle type: Cars
100% satisfaction guarantee:

We offer you to 100% satisfaction guarantee on our products. So, If you have any problem with our products then please contact with us and we will be happy to solve the problem for you.

Equally Important that Customer satisfaction is our highest priority.
In addition, our every products that we sell has a strict quality inspection. So that, If you want to buy our products then do not hesitate to add them to the cart and buy it. Correspondingly, We are committee to providing you best products and services.

Robo Tech Valley

Robotics Starting Kit with Ninja X2 Chassis


There are no reviews yet.

Be the first to review “Robotic Claws”