Best joystick module price in bd for Arduino KY-023

৳ 110.00

Description :

This is a gaming / robotics joystick module for Arduino and other micro-controllers. Simply connect the X and Y outputs to two analog inputs of your microcontroller to provide X,Y control of your RC device, robot or game. It also has a switch that is connected to a digital pin (pulls to ground when pushed) to provide an On/Off or mode change function.

Application :

  • Camera Pan/Tilt Control
  • Game Input/Control
  • Robot Control
  • Analog Input of Parameters
  • Widely use in DIY projects


Earn 110 ROBO-Points worth ৳ 1.10


Description: joystick module price in bd

Joystick module price in bd. Analog joystick-like devices used for example Controllers PlayStation second detection directions of traffic is carried by two potentiometers – one (4.7 k Ω ) on each axle. The device also has a button activated by pressing the knob . To operate the device, all you need is a microcontroller with an analog-to-digital converter (analog input in Arduino ). The location information of the knob is transmitted through an analog signal, in which the voltage corresponds to the given position. Each axis has a separate analogue output. The state of the button is detected by a digital output which, when switched on, becomes low.

  • 1. Input voltage range: DC 3.3V to 5V
  • 2. Output signal: the module has two-way analog output and a digital output interface, the output value corresponding to (X, Y) bi-axial offset, the type of analog; keys that the user press, the Z axis is a push switch read as digital input.
  • 3. Arduino controller can be programmed, the sensor expansion board plug, complete with creative remote interactive works.
  • 4. Cross joystick is a bi-directional 10K resistor, with the rocker in different directions, the resistance should be changed by moving the lever. This module uses 5V power supply, the original state of X, Y read voltage of 2.5V or so, when pressed with the arrow direction, the read voltage value increases with the maximum to 5V, voltage decreases while move lever in opposite direction, The minimum is 0V.

You have to use 2 analog inputs of MCU to read (X Y) the analog output of this module, the switch is a button which you may use with a digital input pin of your Micro Controller eg. Arduino, Raspberry Pi, Orange Pi, NodeMCU, ESP32, ARM AVR development boards.

Features : joystick module price in bd

  • Easy to interface with Arduino and other Microcontrollers
  • The joystick also has a push button that could be used for special applications.
  • The X and Y axes are two ~10k potentiometers which control 2D movement by generating analog signals.

Technical Specifications : joystick module price in bd

  • Operating Voltage: 5V
  • Internal Potentiometer value: 10k
  • 54mm pin interface leads
  • Dimensions: 1.57 in x 1.02 in x 1.26 in (4.0 cm x 2.6 cm x 3.2 cm)
  • Operating temperature: 0 to 70 °C

Using the Joystick Module connection plate, it boils down to connecting the following pins:

  • VCC – Supply voltage (5 V).
  • GND – System weight.
  • VRx – Analog output for the vertical axis (in the middle position, the value equal to half the voltage supply VCC / 2).
  • VRy – Analog output for the horizontal axis (in the middle position, the value equal to half the voltage supply VCC / 2).
  • SW – The digital signal of the button, when switched on, reaches the GND value, switched off – it is in the floating position – so you should add the pull-up resistor to the power supply
Package Include:joystick module price in bd

1 x Joystick Module for Arduino KY-023

100% satisfaction guarantee: joystick module price in bd

We offer you to 100% satisfaction guarantee on our products. So, If you have any problem with our products then please contact with us and we will be happy to solve the problem for you.

Equally Important that Customer satisfaction is our highest priority.
In addition, our every products that we sell has a strict quality inspection. So that, If you want to buy our products then do not hesitate to add them to the cart and buy it. Correspondingly, We are committed to providing you best products and services. best product joystick module price in bd.

Robo Tech Valley

ESP8266 NodeMCU V3



There are no reviews yet.

Be the first to review “Best joystick module price in bd for Arduino KY-023”